Compound Cross Reference Chart
NITRILE or BUNA-N or NBR: | Rubber Dynamics | Acushnet | National O-Rings |
Parco | Parker | Precision | RT | Spec Seal |
Typical Usage |
General Purpose 70 | N7002 | H14327 | B46-70 | 4900-70 | N674-70 | 7507 | N7002 | N100-70 | General Purpose, 70 Durometer |
General Purpose 90 | N9002 | H144339 | C90-90 | 4177-90 | N552-90 | 7509 | N9002 | N140-90 | High Pressure Sealing |
General Purpose 40 | N4003 | B62-40 | 2159-40 | N545-40 | 7184 | N4003 | N104-40 | General Purpose, 40 Durometer | |
General Purpose 50 | N5003 | C24-50 | 2159-50 | N299-50 | 7185 | N105-50 | General Purpose, 50 Durometer | ||
General Purpose 60 | N6003 | H14136 | C20-60 | 2110-60 | N525-60 | 7506 | N106-60 | General Purpose, 60 Durometer | |
General Purpose 80 | N8003 | C97-80 | N368-80 | N108-80 | General Purpose, 80 Durometer | ||||
Oil Service 70 | N7002 | H14327 | B46-70 | 4200-70 | N674-70 | 7507 | N120-70 | Oil,SAE120R1,Class l | |
High Acrylo 70 | N7015 | H14126 | C9-70 | 488-70 | N497-70 | 8307 | N7015 | N150-70 | Fuel, SAE120R1, Class II |
FDA Listed Formula 70 | N7039 | H14100 | C22-70 | 2068-70 | N508-75 | 7077 | N7039 | N168-70 | FDA, per CFR 177.2600 |
Viton or FLUOROELASTOMER or FKM: | |||||||||
General Purpose BLACK 75 | F7001 | F13664 | V14-75 | 9000-75 | V747-75 | 19357 | F7001 | V700-75 | MIL-R-83248 /1, AMS 7280 |
General Purpose BROWN 75 | F7002 | F13327 | V35-75 | 9005-75 | V884-75 | 16207 | F7002 | V708-75 | Brown Viton |
General Purpose BROWN 90 | F9002 | V9-90 | 9006-90 | V894-90 | 16209 | V708-90 | High Pressure Sealing, Brown | ||
General Purpose BLACK 90 | F9001 | F13681 | V23-90 | 9009-90 | V709-90 | 19359 | F9001 | V709-90 | MIL-R 83248/2, AMS 7279 |
FDA Listed Formula BLACK 75 | F7001 | 9040-70 | V760-75 | FDA per CFR 177.2600 | |||||
SILICONE: | |||||||||
Standard FDA RED 70 | S7001 | L13402 | S59-70 | 1235-70 | S604-70 | 11357 | S7001 | S500-70 | AMS 3304, MS9068 |
Standard FDA RED 70 | S7001 | L13402 | S54-70 | 1373-70 | S355-70 | 11737 | S7001 | S600-70 | AMS7267, MS9385 |
Yellow 70 | S7009 | L13298 | S93-60 | Yellow | |||||
General Purpose FDA 60 | S6001 | L13240 | S66-60 | 1235-60 | S613-60 | 11356 | S506-60 | AMS 3303 | |
ETHYLENE PROPYLENE: | |||||||||
General Purpose BLACK 70 | E7001 | E17016 | E50-70 | 5601-70 | E603-70 | 3407 | E7001 | E300-70 | General Purpose 70 Durometer |
FDA Listed Formula 70 | E7013 | E17173 | E92-70 | 5601-70 | E883-70 | 3077 | E7013 | E300-70 | FDA, per CFR 177.2600 |
General Purpose 60 | E6001 | E17005 | E66-60 | 5601-60 | E306-60 | General Purpose 60 Durometer | |||
NEOPRENE or CHLOROPRENE: | |||||||||
General Purpose 70 | C7006 | N18538 | N11-70 | 3110-70 | C873-70 | 2347 | C7001 | C200-70 | AMS 3209 |
Compounds are approved to nearly every military, aerospace, ASTM, SAE, automotive, petroleum industry and commercial specification. The most widely used specifications are the AN, M, MS and NAS specifications. This reference table is arranged by drawing number.
Sealing | Recommended Temp. Range°F |
||||||||
Drawing No. | Specifications | Static | Dynamic | Fluid | Low | High | Elastomer | Compound | Comments |
AN 123951 thru AN 124050 |
AMS 7270 | x | x | Aircraft fuels | -40 | +302 | Nitrile | 4456-70 | For use in aircraft fuels, both piston (gasoline) and jet (jet fuels) engines. |
M25988/1 | MIL-R-25988 Class 1, Grade 70 |
x | x | Aircraft fuels and lubricants |
-70 | +392 | Fluorosilicone | 1903-70 | Blue color as required by MIL spec.Not recommended for high pressure dynamic applications. |
M25988/2 | MIL-R-25988 Class 3, Grade 75 |
x | x | Aircraft fuels and lubricants |
-70 | +437 | Fluorosilicone | 1904-75 | Blue color as required by MIL spec. Higher modulus and higher temperature resistance than 1903-70. |
M25988/3 | MIL-R-25988 Class 1, Grade 60 |
x | x | Aircraft fuels and lubricants |
-70 | +392 | Fluorosilicone | 1902-60 | Blue color as required by MIL spec. Lower durometer than 1903-70. For low pressure applications. |
M25988/4 | MIL-R-25988 Class 1, Grade 80 |
x | x | Aircraft fuels and lubricants |
-70 | +392 | Fluorosilicone | 1905-80 | Blue color as required by MIL spec. Higher durometer than 1903-70. |
M83248/1 | MIL-R-83248 Class 1 |
x | x | Aircraft fuels and lubricants |
-20 | +400 | Fluorocarbon | 9009-75 | Excellent resistance to compression set. |
M83248/2 | MIL-R-83248 Class 2 |
x | x | Aircraft fuels and lubricants |
-20 | +400 | Fluorocarbon | 9009-90 | Higher durometer than 9009-75. |
M83461/1A | MIL-P-83461 | x | x | MIL-H-5606 | -65 | +275 | Nitrile | 4367-70 | Better dynamic performance and longer service life at 257°F than 4067-70. |
AS3578 | AMS 7271 | x | Aircraft fuels | -58 | +257 | Nitrile | 4465-65 | This drawing cover tube fitting sizes only. | |
AS3578 | x | x | Aircraft fuels | -58 | +257 | Nitrile | 4465-65 | Not recommended for high pressure dynamic applications. | |
AS3582 | AMS 3304 | x | x | Dry heat and petroleum based lube oils |
-85 | +400 | Silicone | 1235-70 | Not recommended for high pressure dynamic applications. |
MS9385 | AMS 7267 | x | Dry heat and petroleum based lube oils |
-85 | +500 | Silicone | 1373-70 | This drawing cover tube fitting sizes only. | |
MS9386 | x | x | -85 | +500 | Silicone | 1373-70 | This drawing covers all sizes except the tube fitting sizes. | ||
MS9387 | AMS 7278 | x | Aircraft fuels and lubricants |
-20 | +400 | Fluorocarbon | 9009-75 | This drawing cover tube fitting sizes only. | |
MS28775 | MIL-P-25732 | x | x | MIL-H-5606 | -65 | +275 | Nitrile | 4067-70 | MIL-H-5606 is the petroleum base hydraulic fluid used in military aircraft (inactive for new designs. see M 83461/1A) |
MS28900 | AMS 3209 | x | Ozone | -40 | +212 | Neoprene | 3110-70 | For weather resistant seals. (Non-standard sizes) | |
MS29512 | MIL-P-5315 | x | Aircraft fuels | -65 | +158 | Nitrile | 0457-60 | This drawing cover tube fitting sizes only. | |
MS29513 | x | x | Aircraft fuels | -65 | +158 | Nitrile | 0457-60 | This drawing covers all sizes except the tube fitting sizes. | |
NAS617 | MIL-R-7362, Type 1 |
x | x | Synthetic diester jet engine lubricants (MIL-L-7808) |
-65 | +257 | Nitrile | 4043-70 | This drawing cover tube fitting sizes only. |
NAS1611 | NAS 1613, REV2 or REV4 |
x | x | Phosphate ester hydraulic fluid (Skydrol) |
-65 | +250 | Ethylene Propylene |
This drawing covers all sizes except tube fitting sizes. Inactive for new design. | |
NAS1612 | NAS 1613, REV2 or REV4 |
x | -65 | +250 | Ethylene Propylene |
This drawing covers tube fitting sizes only. Inactive for new design. | |||
IL-SPEC Compounds
Popular Compounds
Here we feature the most popular compounds available in the market. These compounds are suitable for general purpose applications and therefore usually the most economical possible solution. Most of sizes are in stock.
Compound | Elastomer | Color | Description |
E70 NSF E-7013 |
EPDM NSF | Black | * 70 EPDM – NSF61/FDA, Sulfur Cured NSF 61, 21CFR,177.2600,a-d |
E70 E-7001 |
EPDM | Black | * 70 EPDM, General Purpose M3BA710 A14 B13 C12 EA14 F19 |
HNBR70 N-7003 |
HNBR | Green | * 70 Highly Saturated Nitrile, M4DH716 A26 B36 EO16 EO36 Z = GREEN COLOR |
CR70 C-7001 |
Neoprene | Black | * 70 Neoprene, General Purpose M3BC710 A14 B14 EO14 EO34 F17 |
BN70 N-7002 |
Nitrile | Black | * 70 Nitrile, General Purpose M2BG714 B34 EA14 EF11 EF21 EO14 EO34 F17 |
BN70 NSF N-7039 |
Nitrile NSF | Black | * 70 Nitrile, NSF Certified, Sulfur Cured NSF 61/ 21CFR 177.2600, a-d |
S70 S-7001 |
Silicone | Rust | * 70 Silicone, General Purpose H214M7GE705 A19 B37 EA14 EO16 EO36 F19 G11 |
V70 BROWN F-7002 |
Viton | Brown | * 75 Viton, General Purpose M4HK710 A1-11 B38 EF31 EO78 Z1=75 DURO Z2=BROWN COLOR Z3=DUPONT VITON |
V70 F-7001 |
Viton | Black | * 75 Viton, General Purpose M4HK710 A1-11 B38 EF31 EO78 Z1=75 DUROMETER Z2=DUPONT VITON |
BN90 N-9001 |
Nitrile | Black | * 90 Nitrile, General Purpose M7BG910 B14 EA14 EF11 EF21 EO14 EO34 |
V90 F-9001 |
Viton | Black | * 90 Viton, General Purpose M3HK910 A1-10 B38 EF31 EO78 Z=DUPONT VITON |
FDA CompoundsThe rubber compounds in the following list all comply with Paragraph 177.2600 of Title 21, Sub-Paragraphs a) through d), Code of Federal Regulations, “Rubber Articles Intended for Repeated Use”. It should be noted that the Food and Drug Administration does not actually approve any rubber compounds. Rather it publishes a list of permissible ingredients and the maximum allowable concentration of each. These ingredients are broken down into the following categories: Elastomers, Vulcanization Agents, Accelerators, Retarders, Activators, Antioxidants and Antizonants, Plasticizers, Fillers, Colors, Lubricants, Emulsifiers, and Miscellaneous. It is the responsibility of the manufacturer, or it compound supplier, to ensure that FDA compounds are formulated according to these guidelines, and are cured under conditions of good manufacturing practice. All compounds in the list are black in color and sulfur cured unless noted otherwise. All NSF (National Sanitation Foundation) certified compounds also meet FDA requirements. Finally, nearly all silicone compounds are also FDA compliant.
Compound | Elastomer | Color | Description |
C-7014 | Neoprene FDA | Black | 70 Neoprene, FDA M2BC710 A14 B14 EO14 EO34 Z=CFR 21,177-2600, a-d |
E-5005 | EPDM FDA | Black | 50 EPDM, FDA M4AA510 A13 B13 EA14 F17/21CFR,177.2600,a-d |
E-5014 | EPDM FDA | Purple | 50 EPDM, FDA, M4AA506 A13 B13 C12 EA14 F17 Z=PURPLE COLOR/CFR 21, 177-2600, a-d |
E-6004 | EPDM FDA | Black | 60 EPDM, FDA, Peroxide Cured M2CA610 A25 B35 C32 F18 Z1=PEROXIDE CURED Z2=21CFR,177.2600,a-d |
E-6014 | EPDM FDA | Black | 60 FDA EPDM M3BA610 A14 B13 EA14 F17/21CFR,177.2600,a-d |
E-6015 | EPDM FDA | Purple | 60 EPDM, FDA, M4AA610 A13 B13 C12 EA14 F17 Z=PURPLE COLOR/21CFR 177.2600, a-d |
E-6514 | EPDM FDA | Black | 65 FDA EPDM |
E-7010 | EPDM FDA | Black | 70 EPDM FDA Peroxide Cured M2DA710 A26 B36 EA14 G11 Z=PEROXIDE CURED/21CFR,177.2600,a-d |
E-7014 | EPDM FDA | Black | 70 EPDM, FDA M4AA710 A13 B13 EA14 F17/21CFR,177.2600,a-d |
E-7019 | EPDM FDA | White | 70 EPDM, FDA, M3CA707 A25 B35 C32 EA14 F17 Z=WHITE COLOR/21CFR,177.2600,a-d |
E-7026 | EPDM FDA | Blue | 70 EPDM, FDA, M3BA710 A14 B13 C12 F17 Z=BLUE COLOR/21CFR,177.2600,a-d |
E-7033 | EPDM FDA | Black | 70 EPDM, Sulfur Cured, FDA M3BA710 A14 B13 C12 EA14 F17/21CFR 177.2600, a-d |
E-8004 | EPDM FDA | Black | 80 EPDM, FDA, Peroxide Cured M2CA810 A25 B35 C32 F18 Z=PEROXIDE CURED/21CFR,177.2600, a-d |
FS-6002 | Fluorosilicone FDA | Blue | 60 Fluorosilicone, FDA M2HK606 EF31 EO36 Z=BLUE COLOR/21CFR, 177.2600, a-d |
N-5014 | Nitrile FDA | Black | 50 Nitrile, FDA M2BG510 B14 EA14 F17/21CFR,177.2600,a-d |
N-5016 | Nitrile FDA | Black | 50 Nitrile, Low Water Swell, FDA M2BG510 B14 EA14 EF11 F17/21CFR,177.2600,a-d |
N-6014 | Nitrile FDA | Black | 60 Nitrile, FDA M2BG610 B14 EA14 EO14 EO34 F17/21CFR,177.2600,a-d |
N-7014 | Nitrile FDA | Black | 70 Nitrile, FDA M2BG714 B34 EA14 EO14 EO34/21CFR,177.2600,a-d |
N-7034 | Nitrile FDA | Black | 70 Nitrile, FDA for Use with Milk M2BG714 B34 EA14 / 21CFR, 177.2600, a-e |
N-7041 | Nitrile FDA | White | 70 FDA Nitrile, M5BG710 A14 B14 EO14 EO34 Z=WHITE COLOR/21CFR, 177.2600, a-d |
N-7046 | Nitrile FDA | Black | 70 FDA Nitrile with 40% Acrylonitrile M2BG714 B34 EA14 EO14 EO34 Z1=40% ACN/21CFR,177.2600,a-d |
N-7051 | Nitrile FDA | Red | 70 Nitrile, FDA, M2BG714 B14 EA14 EO14 EO34 F17 Z=RED COLOR/21CFR, 177.2600, a-d |
N-7502 | Nitrile FDA | Black | 75 Nitrile, FDA M2BG714 B34 EA14 EO14 EO34 Z=75 DURO/21CFR,177.2600,a-d |
N-7503 | Nitrile FDA | Black | 75 Nitrile, FDA, NSF 61 Certified M2BG714 B14 EA14 EO14 EO34 F17 Z=75 ± 5 DUROMETER |
N-8004 | Nitrile FDA | Black | 80 Nitrile, FDA/NSF 61 Certified M2BG814 B14 EA14 EO14 EO34/21CFR 177.2600, a-d/NSF 61 |
N-8014 | Nitrile FDA | Black | 80 Nitrile, FDA M7BG810 B14 EA14 EO14 EO34/21CFR,177.2600,a-d |
N-9009 | Nitrile FDA | Black | 90 Nitrile, FDA, Low Compression Set M7BG910 B14 EA14 EO14 EO34/21CFR, 177.2600, a-d |
N-9014 | Nitrile FDA | Black | 90 Nitrile, FDA M6BG910 B14 EO14 EO34/21CFR,177.2600,a-d |
NSF Compounds
The National Sanitation Foundation (NSF) is a not-for-profit organizations whose mission is to facilitate of public health and safety standards, and to provide testing services to those standards. Although conformance to these standards is voluntary, in many industries NSF standards have become the de facto benchmark for consumer product acceptability. In the rubber industry, the most important standard by far, is the “NSF Standard 61: Drinking Water System Components – Health Effects”. Rubber compounds submitted to NSF undergo rigorous testing to determine whether any contaminants leach or migrate from the material when in long term contact with drinking water, and if so, if the level of migration is acceptable from a public health viewpoint. These compounds also comply with FDA requirements per CFR21, 177-2600, a-d.
Compound | Elastomer | Color | Description |
E-6006 | EPDM NSF | Black | 60 EPDM, FDA/NSF 61 Certified M4AA610 A13 B13 C12 EA14 F17/21CFR 177.2600, a-d/NSF 61 |
E-6502 | EPDM NSF | Black | 65 EPDM, FDA/NSF 61 Certified M4AA610 A13 B13 C12 EA14 F17 Z=65 ± 5 DUROMETER |
E-7013 | EPDM NSF | Black | * 70 EPDM – NSF61/FDA, Sulfur Cured NSF 61, 21CFR,177.2600,a-d |
E-7020 | EPDM NSF | Black | 70 EPDM, Peroxide Cured, NSF 61 Certified, FDA Compliant, High & Low Temp M4CA714 A25 B35 C32 EA14 F19/NSF61/21CFR,177.2600,a-d |
E-8002 | EPDM NSF | Black | 70 EPDM, FDA/NSF61 Certified, Peroxide Cured NSF 61/FDA 21CFR,177.2600,a-d |
E-8005 | EPDM NSF | Black | 80 EPDM, FDA/NSF 61 Certified M3BA810 A14 B13 C12/21CFR 177.2600, a-d/NSF 61 |
E-8006 | EPDM NSF | Black | 80 EPDM, FDA/NSF 61 Certified, Peroxide Cured M7CA810 A25 B35 C32 EA14 Z=PEROXIDE CURED/NSF 61/21CFR, 177.2600, a-d |
E-9003 | EPDM NSF | Black | 90 EPDM, Peroxide Cured, FDA/NSF 61 Certified M8CA910 A25 B35 C32 F17/ NSF61/ 21CFR, 177.2600, a-d |
N-5007 | Nitrile NSF | Black | 50 Nitrile, FDA, NSF 61 Certified M2BG507 B14 EA14 EO34 F17 |
N-6010 | Nitrile NSF | Black | 60 Nitrile, FDA/NSF 61 Certified M2BG610 B14 EA14 EO14 EO34 F17/21CFR 177.2600, a-d/NSF 61 |
N-7027 | Nitrile NSF | Black | 70 Nitrile, FDA/NSF Certified, Low Compression Set NSF 61/21CFR 177.2600, a-d |
N-7039 | Nitrile NSF | Black | * 70 Nitrile, NSF Certified, Sulfur Cured NSF 61/ 21CFR 177.2600, a-d |
S-7004 | Silicone NSF | Rust | 70 Silicone, FDA/NSF Certified NSF 61/21CFR 177.2600, a-d |
S-7008 | Silicone NSF | Rust | 70 Silicone, FDA/NSF 61 Certified M7GE705 A19 B37 EA14 EO16 EO36 F19/21CFR 177.2600, a-d/NSF 61 |
Internally Lubed Compounds
For those applications where an external lubricant is not desirable (such as automatic feeder bowl assemblies), we offer the internally lubricated compounds. Internal lubrication involves the introduction of a lubricating agent into the compound during the mixing stage. The advantage of this type of lubrication is that the lubricant is dispersed throughout the compound, and therefore the vulcanizate, instead of just on the surface. Since all rubber compounds have relatively high coefficients of friction, it is very important to counteract this in the most efficient way possible, especially in dynamic sealing applications. Due to its chemical makeup, it is best suited for compounds where the curing temperature is not too high, such as nitriles and EPDMs. It should be noted, however, that some fluids and solvents can dissolve or leach out the proprietary lubricant, so testing in the actual environment is always recommended.
Compound | Elastomer | Color | Description |
E-5002 | EPDM Lubed | Black | 50 EPDM, Internally Lubed M3BA507 A14 B13 Z=INTERNALLY LUBED |
E-6024 | EPDM Lubed | Black | 60 EPDM, Internally Lubed M6CA614 A25 B35 EA14 G21 Z = INTERNALLY LUBED |
E-7011 | EPDM Lubed | Black | 70 EPDM, Internally Lubed M3DA714 A26 B36 C32 EA14 F19 Z=INTERNALLY LUBED, 5 PHR |
E-7016 | EPDM Lubed | Black | 70 EPDM with Paraffinic Plasticizer M4AA710 A13 B13 C12 EA14 Z=PARAFFINIC PLASTICIZER |
E-7018 | EPDM Lubed | Black | 70 EPDM, FDA, Internally Lubed with PTFE M3BA710 A14 B13 EA14 F17 Z=PTFE INTERNAL LUBE/21CFR 177.2600, a-d |
E-7025 | EPDM Lubed | Black | 70 EPDM, Internally Lubed w/MOS2 M4AA710 A13 B13 C12 EA14 F17 Z=MOS2 LUBED |
E-8008 | EPDM FDA | Purple | 80 EPDM, FDA, M3BA710 A14 B13 C12 Z1=PURPLE COLOR Z2=80 DUROMETER/21CFR 177.2600, a-d |
F-7010 | Viton Lubed | Brown | 75 Viton, 5PHR PTFE Internal Lubricant M6HK810 A1-10 B38 C12 EF31 EO78 EO88 Z1=75 DURO, Z2=PTFE INTERNAL LUBRICANT, Z3=BROWN COLOR |
F-7011 | Viton Lubed | Brown | 75 Viton, 8PHR PTFE Internal Lubricant M2HK810 A1-10 B38 EF31 EO78 EO88 Z1=75 DURO, Z2=PTFE INTERNAL LUBRICANT Z3=BROWN COLOR |
F-7012 | Viton Lubed | Black | 75 Viton, 5 PHR PTFE Internal Lubricant M6HK810 A1-10 B38 EF31 EO88 Z1=75 DURO, Z2=PTFE INT LUBRICANT Z3=DUPONT VITON |
F-7019 | Viton Lubed | Green | 75 Viton, PTFE Internally Lubed, M2HK810 A1-10 B38 Z1=75 DURO Z2=LIGHT GREEN Z3=INT LUBED W/PTFE Z4=DUPONT VITON |
F-7021 | Viton Lubed | Black | 75 Viton with 3% PTFE Internal Lube M4HK710N A1-11 B38 EF31 EO78 Z1=75± 5 DUROMETER Z2=3% PTFE INT. LUBE Z3=DUPONT VITON |
N-5002 | Nitrile Lubed | Black | 50 Nitrile, Internally Lubed M2BG510 A14 B34 EO14 EO34 F17 Z=MOS2 LUBED |
N-5005 | Nitrile Lubed | Black | 50 Nitrile, Internally Lubed M2BG510 B34 EA14 EF11 EF21 EO14 EO34 F17 Z=INTERNAL LUBE, 5 PHR |
N-6006 | Nitrile Lubed | Black | 60 Nitrile, 5PHR Internal Lubricant M2BG614 B34 EA14 EF11 EF21 EO14 EO34 Z=INTERNAL LUBRICANT |
N-7025 | Nitrile Lubed | Black | 70 Nitrile, Internally Lubed w/ MOS2 M2BG714 B34 EA14 EF11 EF21 EO14 EO34 Z=MOS2 LUBED |
N-7031 | Nitrile Lubed | Black | 70 Nitrile with Paraffinic Plasticizer M2BG710 B34 EA14 EO14 EO34 Z=PARAFFINIC PLASTICIZER |
N-7044 | Nitrile Lubed | Black | 70 FDA Nitrile, 5 PHR Internal Lubricant M2BG714 B14 EA14 EF11 EF21 F17 Z=INTERNAL LUBE 5PHR STRUKTOL |
N-7045 | Nitrile Lubed | Blue | 70 Nitrile with 5 PHR Internal Lubricant, M2BG710 B14 EA14 EF11 EF21 EO14 EO34 F17 Z1=BLUE COLOR Z2=INTERNALLY LUBED |
N-7047 | Nitrile Lubed | Black | 70 Nitrile, 5 PHR Internal Lubricant M2BG714 B34 EA14 EF11 EF21 EO14 EO34 F17 Z=INTERNALLY LUBED, 5 PHR |
N-7052 | Nitrile Lubed | Green | 70 Nitrile, Internally Lubed, M2BG710 B14 EA14 EF11 EF21 EO14 EO34 Z1=GREEN Z2=INTERNAL LUBE |
N-7067 | Nitrile Lubed | Red | 70 Nitrile, Internally Lubed, M2BG710 B14 EA14 EF11 EF21 EO14 EO34 Z1=RED COLOR Z2=INTERNALLY LUBED |
N-7072 | Nitrile Lubed | Black | 70 Nitrile, Graphite Impregnated M2BG714 B14 EA14 EF11 EF21 EO14 EO34 Z=GRAPHITE IMPREGNATED |
N-8006 | Nitrile Lubed | Black | 80 Nitrile, Graphite Filled M2BG810 B14 EO14 EO34 Z=GRAPHITE FILLED |
N-8009 | Nitrile Lubed | Black | 80 Nitrile, Internally Lubed M7BG814 B14 EA14 EF11 EF21 EO14 EO34 Z=INTERNALLY LUBED |
N-9007 | Nitrile Lubed | Black | 90 Nitrile, Internally Lubed M7BG910 B14 EA14 EF11 EF21 EO14 EO34 Z = INTERNALLY LUBRICATED |
UL Compounds
Underwriters Laboratories Inc. (UL) is an independent, not-for-profit product safety testing and certification organization. UL has tested products for public safety for more than a century. Founded in 1894, UL has earned the reputation as a leader in product safety testing and certification within the United States. Recent initiatives have resulted in UL becoming one of the most recognized conformity assessment providers in the world. Today, services provided by UL extend to helping companies achieve global acceptance, whether for an electrical device, a programmable system, or an organization’s quality process. Tested and recognized under UL’s category JMLU2, “Gasket and Seal Materials – Components”. All compounds have been found to be suitable for the following end-use applications: 1) manufactured or natural gas; 2) diesel fuel, fuel oil, or lubricating oil; and 3) liquefied petroleum (LP) gas. In addition, compound N-7026 is suitable for use in gate valves in fire protection equipment (see UL 262).
Compound | Elastomer | Color | Description |
N-7026 | Nitrile UL | UL Recognized | 70 Nitrile, UL Recognized M2BG714 B14 EA14 EF11 EF21 EO14 EO34 F17 Z=UL RECOGNIZED |
N-8002 | Nitrile UL | UL Recognized | 80 Nitrile, UL Recognized M7BG814 B14 EO14 EO34 F16 Z=UL RECOGNIZED |
N-9004 | Nitrile UL | UL Recognized | 90 Nitrile, UL Recognized M7BG914 B14 EF11 EF21 EO14 EO34 Z=UL RECOGNIZED |